Material Type
Certificate Details
Naval certificates: in Size and Alloy, use a | symbol to split the value onto two lines in the cell (e.g. "500x1350x5MM - 1 Nos | 1250x1400x5MM - 1 Nos").
1Dimensional Properties
OD (Outer Diameter)
Width
Thickness
Length (optional)
Camber in mm/mtr MAX (optional)
2Mechanical Properties
Hardness in VPN · IS 1501 : 2020
Grain Size in mm · IS 4748 : 1988
Tensile Strength in N/mm² · IS 1608 : 2022
Elongation % per 50mm · IS 1608 : 2022
Yield Strength — naval: (0.2% offset) MPa
Yield Strength (0.5% extention under load) MPa
Bend Test (Transverse/Longitudinal) · IS 1599 : 2023
Electrical Resistivity at 20° C (ohm/mm²/m) · IS 3635 : 1968
Electrical Conductivity (% IACS) · IS 3635 : 1968
Erichen Value (mm)
R.A Value (um)
Surface Finish (Visual)
These certificates print 3 Observed sample columns. Fill only Observed 1 and the same value repeats in all three columns.
Tolerance, Grain Size and Bend Test fields left blank print their defaults: (+/- 0.1), (+/- 0.02), N/A, PASS, OK.
3Chemical Composition (% by weight)
Copper (Cu)
Lead (Pb)
Tin (Sn)
Iron (Fe)
Nickel (Ni)
Zinc (Zn)
Bismuth (Bi)
Total Impurities
Oxygen
Remarks (printed below the tables)
One numbered point per line. Standard lines are pre-filled when you switch to Naval — edit lot-specific details in point 1.
BIS Certification Line
Prints as: "Certified that the sample of a specimen of [Material] is as per specification under BIS certificate licence No. 9100206810 as per [Standard], dated 11/10/2024." Licence no. and date are fixed; leave fields blank for the defaults shown. Selecting RoHS replaces the standard certification line with the RoHS declaration (with or without the BIS clause).